The following illustration explains the process of induced draft counterflow tower and induced draft counterflow tower with fill. Check out the direction of air coming inside the heat exchanger (indicated by green arrows) and the hot air exiting the cooling tower (indicated by red arrows). These are followed with the illustrations of induced draft, double-flow [...]
Herman Nelson AC Unit parts are devices used in controlling and maintaining temperatures and humidity at preferred levels through the distribution of dry, cold or hot air into an indoor environment. Nelson AC Unit parts regulate air by pumping cool air indoors thus replacing hot air, which is then forced into the ductwork and out [...]
This is how a cooling tower closed circuit looked like. See the cold water indicated by the blue arrows. The cool water is being pumped up to by a centrifugal pump. At the top of the cooling tower, the cool water is sprayed down. Hot air / hot vapour indicated by red arrows escape above [...]
Water is not only important for life but also plays a very vital role in the industrial and manufacturing sector. But if the quality of water is not up to the required standard than ultimately it will affects the quality of an end product because water is used extensively in cleaning and cooling activities. This [...]
The CTV-1500-60 cooling tower vacuum removes contaminants without having to drain the water from your cooling tower. Learn how the CTV-1500-60 can cut overhead and save you money
Most kitchens have too much or too little refrigerated space at the proper locations to meet their needs. In other words, the physical capacity may be adequate, but either it’s not the correct type of refrigerator space or it’s not flexible enough to be used to maximum efficiency. Having the right kinds of refrigeration actually [...]
